Specializing in the production of various Rebar, steel coils, wire rods, aluminum sheets, aluminum coils, steel plates
PRODUCTS
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
S235J0 Carbon Steel I beam
I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.
A36 Carbon Steel I beam
I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.
201,304 Stainless Steel I beam
Stainless steel I-beams (also referred to as H-beams) are premium structural profiles engineered for applications where standard steel cannot perform. Combining the exceptional strength-to-weight ratio of the “I” cross-section with the inherent corrosion resistance of stainless steel, they offer a permanent solution for structures exposed to harsh environments, demanding hygiene standards, or requiring a lasting aesthetic finish. This eliminates the need for protective coatings and significantly reduces lifetime maintenance costs. Classification: Universal Beam (I-Beam / H-Beam)
304L,316 Stainless Steel I beam
Stainless steel I-beams (also referred to as H-beams) are premium structural profiles engineered for applications where standard steel cannot perform. Combining the exceptional strength-to-weight ratio of the “I” cross-section with the inherent corrosion resistance of stainless steel, they offer a permanent solution for structures exposed to harsh environments, demanding hygiene standards, or requiring a lasting aesthetic finish. This eliminates the need for protective coatings and significantly reduces lifetime maintenance costs. Classification: Universal Beam (I-Beam / H-Beam)
Q235B Galvanized I beam
Hot-dip galvanized I-steel is also called hot-dip galvanized I-steel or hot-dip galvanized I-steel. It is to immerse the I-beam after derusting into molten zinc at about 500 ℃ to attach a zinc layer to the surface of the I-beam, thus achieving the purpose of anti-corrosion. It is suitable for strong corrosive environments such as various strong acids and alkali fogs.
Q345B Galvanized I beam
Hot-dip galvanized I-steel is also called hot-dip galvanized I-steel or hot-dip galvanized I-steel. It is to immerse the I-beam after derusting into molten zinc at about 500 ℃ to attach a zinc layer to the surface of the I-beam, thus achieving the purpose of anti-corrosion. It is suitable for strong corrosive environments such as various strong acids and alkali fogs.
CONTACT US
Service E-mail
Tel
Address
Starlight Liaocheng International Financial Center, Dongchangfu District, Liaocheng City, Shandong Province
MESAGE
To inquire about our products, please leave your email to us and we will contact you within 24 hours.